|
|
|
|
Tap into the Future with Easy Tapper |
Easy Tapper™ EZ-4.7S Hot Tapping Machine
 |
 |
The Easy Tapper EZ-4.7S Hot Tapping Machine is ideal for petroleum, oil, gas, hydronic heating and cooling applications, water, steam, air and various other fluids where the main line pressure operates at a maximum of 1,480 PSI. A drill motor can be attached to the back end of the cutter shaft to rotate the cutter. forward pressure for the cutter is applied by rotating the spindle. The spindle feature allows the operator to determine the best feed rate. The equipment is precision machined so the cutter holds its linear position into the cut, thereby preventing the cutter from jumping forward into the cut and overloading or locking in place. NOTE: This machine is very fast and easy to use. The short overall length allows for taps in confined spaces. |
STANDARD TAPPING RANGE | 1/2", 3/4", & 1" | | ACCESSORIES AVAILABLE | PER SPECIFIC CUSTOMER NEEDS | | CUTTER TRAVEL | Standard Cutter Travel = 8" Long Travel = 12" | | MACHINE LENGTH WITH CUTTER | 19" or 23" | | PRESSURE RATING | 1,480 P.S.I. at 100° F (Note: The temperature listed is just a reference point. Max Temperature for intermittent use is 700 P.S.I. at 700° F) | METHOD OF APPLIED FORWARD PRESSURE | Rotating the Spindle Advances and Retracts the Cutter | METHOD OF TRANSPORT | CARRYING CASE | | SIDE OUTLET VALVE FOR SHAVINGS REMOVAL | YES, and can be used to Purge, Pressure Test, or as a Machine Drain | | TYPE OF MACHINE TO VALVE ADAPTERS | N.P.T Schedule 40 Adapters are included with Kit / Companion Flanges and ANSI Rated Adapters Priced Separate | | TYPE OF POWER PACKAGE FOR CUTTER ROTATION | Ready for Connection of Electric, Hydraulic, or Air Power Package | | MACHINE / ACCESSORIES | 18 POUNDS / 2 POUNDS | | MACHINE FINISH | NICKEL / ELECTROPLATED NOTE: Stainless Steel Models Availabe upon Request | | MACHINE COST WITH CUTTERS & ADAPTERS (LESS POWER PACKAGE) | EZ-4.7S $3,247.00 USD + Shipping and Handling EZ-4.7SLT $3,579.00 USD + $Shipping and Handling |
NOTE: Shipping and Handling to be determined at the time of sale
|
MODEL EZ-4.7S SPINDLE HOT TAPPING MACHINE PARTS
| PART NUMBER | DESCRIPTION | PRICE | | ET-01 | CARRYING CASE FOR EZ-4.7S | $104.00 | | ET-02 | MACHINE FRONT SECTION | $1,633.00 | | ET-03 | MACHINE BACK SECTION COMPLETE 8" TRAVEL | $1,724.00 | | ET-03-LT | MACHINE BACK SECTION COMPLETE 12" TRAVEL | $2,114.00 | ET-444 | DRIVE SHAFT COMPLETE / COUPLER & BEARINGS | $297.00 | ET-445 | SIDE OUTLET VALVE FOR 600 PSI | $34.00 | ET-04 | PACKING NUT | $199.00 | ET-05 | PURE GRAPHITE PACKING STRIPS 8 PACK | $27.00 | ET-06 | BEARINGS SET | $32.00 | ET-07 | TRAVEL POSTIONER FOR DRIVE SHAFT | $26.00 | | ET-08 | O RING SEAL KIT (3) | $9.00 | | ET-10 | CUTTER COUPLER (ORDER WITH MACHINE OF SHAFT) | $102.00 | | ET-11 | CUTTER HOLDING PIN STANDARD | $8.00 | | ET-12 | HEXAGON DRIVE ADAPTER FOR DRILL ATTACHMENT | $97.00 | | ET-114 | CUTTER FOR 1/2" TAPS | $43.00 | | ET-115 | BI-METAL CUTTER FOR 3/4" BRANCH | $23.00 | | ET-115C | CARBIDE TIPPED CUTTER FOR 3/4" BRANCH | $41.00 | | ET-116 | BI-METAL CUTTER FOR 1" BRANCH | $23.00 | | ET-116C | CARBIDE TIPPED CUTTER FOR 1" BRANCH | $42.00 | | ET-124 | 3/8" STANDARD PILOT BIT | $30.00 | | ET-125 | 5/16" OUR BEST COUPON RETAINING KEEPER PILOT BIT | $97.00 | | ET-122 | 1/4" COBALT PILOT BIT FOR STAINLESS | $31.00 | | ET-123 | 1/4" COBALT COUPON RETAINING PILOT BIT | $74.00 | | ET-14 | MACHINE ADAPTER TO 1/2" N.P.T. | $19.00 | | ET-15 | MACHINE ADAPTER TO 3/4" N.P.T. | $21.00 | | ET-16 | MACHINE ADAPTER TO 1" N.P.T. | $16.00 |
|
|
|
|
